Installing New ATV Tires on Rims: A Step-by-Step Guide

When it comes to off-roading adventures, having the right tires on your ATV is crucial. Over time, the tread on your tires can wear down, reducing their performance and grip. If you find yourself in need of new ATV tires, fear not! With a little know-how and the right tools, you can easily install new tires on your rims and get back to conquering the trails in no time. In this step-by-step guide, we will walk you through the process of putting new ATV tires on rims.

Before you begin, gather all the necessary tools and materials. You will need a tire iron, a valve stem tool, a rubber mallet, and a tire mounting machine. Additionally, make sure you have the correct size and type of tires for your ATV. Once you have everything ready, follow these steps:

Step 1: Remove the old tires from the rims. Start by deflating the tires completely. Then, use the tire iron to pry the bead of the tire away from the rim. Work your way around the entire circumference of the tire until it is completely detached from the rim. Repeat this process for both tires.

Step 2: Clean the rims thoroughly. Use a wire brush to remove any dirt, debris, or old adhesive from the rims. This will ensure a clean surface for the new tires to adhere to.

Step 3: Install the valve stems. Using the valve stem tool, insert the valve stems into the rims. Make sure they are securely in place and tightened.

Step 4: Mount the new tires onto the rims. This step can be a bit challenging, so it may be helpful to have a friend assist you. Start by lubricating the inside of the tire and the rim with a soapy water solution. This will make it easier to slide the tire onto the rim. Place one side of the tire onto the rim, making sure the valve stem is aligned with the hole in the rim. Then, use the tire mounting machine to push the remaining side of the tire onto the rim. Be careful not to pinch the inner tube if your ATV has one.

Step 5: Inflate the tires. Use an air compressor to inflate the tires to the recommended pressure. Check the manufacturer’s guidelines for the correct PSI (pounds per square inch) for your specific ATV and tire type.

Step 6: Seat the beads. To ensure a proper seal between the tire and the rim, you need to seat the beads. This can be done by overinflating the tires slightly and then quickly releasing the air. The pressure difference will force the beads to seat properly.

Step 7: Check for leaks. After seating the beads, inspect the tires for any signs of leaks. Apply a soapy water solution to the valve stems and around the rims. If you see any bubbles forming, there may be a leak that needs to be addressed.

Nr.	Article Name
1	Passenger Car Wheels

By following these step-by-step instructions, you can easily install new ATV tires on your rims. Remember to take your time and be cautious throughout the process. If you encounter any difficulties or are unsure about any step, it is always best to consult a professional. With your new tires properly installed, you can hit the trails with confidence, knowing that your ATV is equipped for optimal performance and safety.